Catalog
Catalogue
SEARCH

    • Price:

SEARCH

QCS - axial fans ≤1950 m³/h


  1. Ventilation systems ›
  2. Industrial fans
  3. › Axial fans
  4. › QCS - axial fans ≤1950 m³/h
QCS - axial fans ≤1950 m³/h S gravity shutter, ordered separately D adapter, to be ordered separately R protective mesh, to be ordered separately QCS - Made in Italy
Price / QCS:
Select
  • QCS 200 M MG (1QC2078) 205.12 € 143.58 € (-30%)
  • QCS 250 M MG (1QC2594) 255.95 € 179.16 € (-30%)
  • QCS 300 M MG (1QC3228) 294.07 € 205.85 € (-30%)
  • QCS 350 M MG (1QC3619) 439.29 € 307.50 € (-30%)
Price / S gravity shutter:
Select
  • 1SE2000 275x275 mm 90.76 € 63.54 € (-29%)
  • 1SE2500 325x325 mm 101.65 € 71.16 € (-29%)
  • 1SE3000 375x375 mm 112.54 € 78.78 € (-29%)
  • 1SE3500 425x425 mm 123.43 € 86.41 € (-29%)
  • 1SE4000 475x475 mm 139.77 € 97.84 € (-29%)
  • 1SE4500 530x530 mm 157.93 € 110.55 € (-30%)
  • 1SE5000 630x630 mm 196.04 € 137.23 € (-30%)
  • 1SE5600 660x660 mm 206.93 € 144.85 € (-30%)
  • 1SE6300 760x760 mm 221.45 € 155.03 € (-29%)
  • 1SE7000 830x830 mm 255.95 € 179.16 € (-30%)
Price / D adapter:
Select
  • 1DP2002 340x340 mm 157.93 € 110.55 € (-30%)
  • 1DP2502 390x390 mm 163.37 € 114.36 € (-30%)
  • 1DP3002 445x445 mm 172.45 € 120.71 € (-30%)
  • 1DP3502 510x510 mm 183.34 € 128.33 € (-30%)
  • 1DP4003 560x560 mm 190.60 € 133.41 € (-30%)
  • 1DP4502 610x610 mm 208.75 € 146.13 € (-29%)
  • 1DP5003 680x680 mm 263.21 € 184.25 € (-30%)
  • 1DP5602 750x750 mm 288.62 € 202.03 € (-30%)
  • 1DP6301 790x790 mm 343.08 € 240.15 € (-30%)
  • 1DP7000 840x840 mm 373.94 € 261.76 € (-29%)
Price / R protective mesh:
Select
  • 5RE7020 275x275 mm 59.00 € 41.30 € (-30%)
  • 5RE7025 325x325 mm 69.89 € 48.92 € (-30%)
  • 5RE7031 375x375 mm 78.06 € 54.64 € (-29%)
  • 5RE7035 425x425 mm 78.96 € 55.27 € (-30%)
  • 5RE7040 475x475 mm 89.85 € 62.90 € (-30%)
  • 5RE7045 530x530 mm 105.28 € 73.70 € (-29%)
  • 5RE7050 630x630 mm 117.99 € 82.59 € (-29%)
  • 5RE7056 660x660 mm 130.69 € 91.49 € (-29%)
  • 5RE7063 760x760 mm 150.67 € 105.46 € (-30%)
  • 5RE7070 830x830 mm 163.37 € 114.36 € (-30%)
Qty.:

European delivery - 30 working days, other countries +7 working days.

Ask a question about this item

Ask a question about this item

QCS - axial fans ≤1950 m³/h

Send
  • QCL - axial fans for residential, commercial and industrial buildings where compact dimensions, quiet operation and adjustable performance are required
  • the series consists of 4 models with impeller diameters from 200 to 350 mm
  • designed for clean air conveying in the -10 °C / +40 °C temperature range
  • optimised intake cone combined with a bionic blade profile to reduce noise levels and increase aerodynamic and energy efficiency

 

CONSTRUCTION

  • supporting frame made of pressed galvanised steel sheets, with radial suction cone
  • aluminium impeller blades shaped for maximum efficiency
  • air flow direction from engine to impeller
  • intake protection made of steel according to EN ISO 12499

 

ENGINE

  • single phase IP20, class B motors
  • all models suitable for S1 operation (continuous operation under constant load)

 

ACCESSORIES

  • S - gravity grilles, mounted outside. This prevents heat loss, wind, rain and birds. When the fan is running, the airflow opens the edges of the louvre and when the fan is switched off, the louvre closes by itself. The frame is made of steel sheets with an epoxy powder coating and the edges are made of technopolymer. The use of gravity grilles results in a slight reduction in performance

  • D - adapter made of epoxy-painted steel sheet. It is required for the attachment of the fan when the width of the wall is less than dimension 'C' (the depth of the fan inlet). The frame shall be made of galvanised steel sheet (D63 and D71 epoxy powder-coated); the four corners shall be provided with 8 threaded inserts of galvanised steel sheet for the attachment of the fan on one side and of a gravity grille or protective mesh on the other

  • R - impeller guard mesh, manufactured in accordance with UNI ISO 12499 and protected against atmospheric agents. This prevents accidental contact with the fan impeller. Frame and mesh made of epoxy-painted steel

  • speed controller, please choose fan model you wish to purchase and contact us to find the right one
  • made in Italy
  • 2 years warranty

Brand: DYNAIR

Technical data and Dimensions

You might also like: